osmo-fl2k - Using USB-VGA dongles as SDR transmitter

How does it work?

A major part of any VGA card has always been a rather fast DAC which generates the 8-bit analog values for (each) red, green and blue at the pixel clock. Given that fast DACs were very rare/expensive (and still are to some extent), the idea of (ab)using the VGA DAC to transmit radio has been followed by many earlier, mostly proof-of-concept projects, such as Tempest for Eliza in 2001.

However, with osmo-fl2k, for the first time it was possible to completely disable the horizontal and vertical blanking, resulting in a continuous stream of pixels (samples). Furthermore, as the supported devices have no frame buffer memory, the samples are streamed directly from host RAM.

As most USB-VGA adapters appear to have no low-pass filters on their DAC outputs, it is possible to use any of the harmonics to transmit signals at much higher frequencies than normally possible within the baseband of the (max) 157 Mega-Samples per seconds that can be achieved.

osmo-fl2k and rtl-sdr

Steve is the creator of the earlier, complementary rtl-sdr software, which since 2012 transforms USB DVB adapters into general-purpose SDR receivers.

Today, six years later, it is hard to think of where SDR would be without rtl-sdr. Reducing the entry cost of SDR receivers nearly down to zero has done a lot for democratization of SDR technology.

There is hence a big chance that his osmo-fl2k project will attain a similar popularity. Having a SDR transmitter for as little as USD 5 is an amazing proposition.

free riders

Please keep in mind that Steve has done rtl-sdr just for fun, to scratch his own itch and for the "hack value". He chose to share his work with the wider public, in source code, under a free software license. He's a very humble person, he doesn't need to stand in the limelight.

Many other people since have built a business around rtl-sdr. They have grabbed domains with his project name, etc. They are now earning money based on what he has done and shared selflessly, without ever contributing back to the pioneering developers who brought this to all of us in the first place.

So, do we want to bet if history repeats itself? How long will it take for vendors showing up online advertising the USB VGA dongles as "SDR transmitter", possibly even with a surcharge? How long will it take for them to include Steve's software without giving proper attribution? How long until they will violate the GNU GPL by not providing the complete corresponding source code to derivative versions they create?

If you want to thank Steve for his amazing work

• reach out to him personally

• contribute to his work, e.g.

• help to maintain it

• package it for distributions

• send patches (via osmocom-sdr mailing list)

• register an osmocom.org account and update the wiki with more information

And last, but not least, carry on the spirit of "hack value" and democratization of software defined radio.

Thank you, Steve! After rtl-sdr and osmo-fl2k, it's hard to guess what will come next :)